Ahhh-motherfraXinG-YEAH!!!!!!!!!!!!!!!!!!!!

R3C · Post by **R3C** » Sat Jul 16, 2005 11:26 am

Men in White!?!? Men in White?!?!?!?!? That's one of the classics of the silver screen!!

R3C · Post by **R3C** » Mon Jul 18, 2005 12:04 pm

Admiral: Has your video card appeared yet?

McNevin · Post by **McNevin** » Tue Jul 19, 2005 12:23 am

Hey guess what, no video card!

<img src="http://www.evolutionnt.ca/shop/catalog/ ... 20TECH.jpg" alighn=top><img src="http://www.geocities.com/TimesSquare/La ... mermad.gif" width =120>

R3C · Post by **R3C** » Tue Jul 19, 2005 1:09 pm

Those FuX0rZ!!! I can't believe that bleeding shite! If they didn't make the best cards, I'd stop buying from them. JeRx0rZ

McNevin · Post by **McNevin** » Tue Jul 19, 2005 2:41 pm

I called the corperate office, and made a complaint to the complaint dept. He called me back in 15 minutes with a tracking number.

So they sent it ground, but he fully re-imbursed shipping.

Even better, the card states it was delivered today...

R3C · Post by **R3C** » Tue Jul 19, 2005 3:04 pm

Very nice!

McNevin · Post by **McNevin** » Tue Jul 19, 2005 10:28 pm

Card is installled, quake3 runs for more than 3 seconds.

As far as I can tell, we are good!

So its the dual DVI model, but Green PCB unfortunatly

Well so long as it works, I dont care what color it is.

McNevin · Post by **McNevin** » Wed Jul 20, 2005 1:30 am

5224 3dmarks (05)

R3C · Post by **R3C** » Wed Jul 20, 2005 2:13 pm

Nice. That's cool that they sent the dual DVI one. Now if you just get another one, you'll be able to do multimon when you aren't SLIing. Now your second card will cost a tiny bit more though. ($20-30)

McNevin · Post by **McNevin** » Wed Jul 20, 2005 3:56 pm

Hmm... 145F at 2.5Ghz in full utilization. Think ill drop the voltage a bit.

However it was prime stable for over 8 hours.

Also its like a million degrees in my room. San diego has the heat blanket on today. Overcast and muggy... and hot.

R3C · Post by **R3C** » Thu Jul 21, 2005 12:30 pm

I hate overcast/muggy/hot-heat-blanket-bastardosity! 145? I'll find out what mine is at. I think it's around 140. What voltage are you running at? I think I only run mine at one or two increments up. I'll check my settings when I get home. (I also dropped the clock down to 2400 while I was trying some things out, and never increased it back to 2500.) I should do that. I forgot all about that until you just mentioned it.

McNevin · Post by **McNevin** » Thu Jul 21, 2005 3:02 pm

I was at 1.475, but i had a prime error. Going to have to up to 1.5.

R3C · Post by **R3C** » Thu Jul 21, 2005 8:04 pm

How far in was the error?

McNevin · Post by **McNevin** » Fri Jul 22, 2005 10:41 am

well i ran it f or over 8 hours, but then i played some family guy while it was priming, and it errored out.

R3C · Post by **R3C** » Fri Jul 22, 2005 12:24 pm

I see, so it was Prime+

Decoding MP4 takes quite a chunk of CPU time, so I'm not surprised that that happened. In fact, I doubt you'd ever run into any stability problems while doing normal gaming etc.

teh Forum

teh Forum

Ahhh-motherfraXinG-YEAH!!!!!!!!!!!!!!!!!!!!